Japan (日本語)
Japan (日本語)
Case Study

CHU de Brest improves surgical planning with new Stratasys 3D printing technology for patient-specific anatomic models


Ultra realistic

J5 MediJet 3D printer’s multi-material, multi-color capabilities enable surgeons to produce realistic models to plan complex surgical procedures, improving planning, training and patient outcomes

France-based University Hospital of Brest (CHU de Brest) is witnessing substantial improvements in pre-surgical planning procedures following the implementation of a new 3D printer by Stratasys’ partner-reseller, Cylaos. The installation gives surgeons highly accurate and detailed 360-degree patient-specific anatomic models prior to the actual operation, which may improve surgical risks   and reduce time in the operation time. 

According to Samuel Guigo, radiology and 3D printing technician at the CHU, the realistic sophistication of the 3D printed models produced with the all-in-one, multi-material, multi-color J5 MediJet over previous single-material, single-color options is transformational and sets a new standard for medical modeling. 

“The accuracy we now enjoy with the J5 3D printed models means our surgeons are far better equipped and prepared before going into theater, which significantly and quantifiably reduces surgical-related risks through improved safety,” he explains.

Guigo adds: “When preparing a vascular surgery for example, millimetric precision is mandatory. With the J5 MediJet, not only can we achieve this, but we have the flexibility to re-print the models to iterate and achieve optimal results, reproducing them with complete consistency, as required. We were simply unable to do this previously.”

The use of Stratasys’ advanced 3D printing technology is, explains Guigo, a crucial factor contributing to the quality of the anatomical models the hospital can produce. This, he says, is underscored by the ElasticoTM photopolymer material

“We can produce models on the MediJet with far greater realism than our other 3D printing technologies allow. With the Elastico material, for example, the haptic feeling and surface smoothness replicate the patient’s soft arteries much more closely,” he says.

In-house Stratasys capability addresses quality issues and supports capacity requirements 

The short-comings in the hospital’s existing alternative technologies also meant that the production of some models had to previously be out-sourced to external providers. Nevertheless, with a level of quality that fell short of the hospital’s requirements, together with a mounting need to better manage increasing volumes, the acquisition of the in-house J5 MediJet made logical business sense.

 

Improving training and patient care

Beyond pre-surgical preparation, the use of patient-specific 3D printed medical models produced on the J5 MediJet for on-demand training can improve patient outcomes by reducing complications and decreasing overall recovery time and length of hospital stay. In addition, with a highly accurate patient-specific 3D printed medical model, surgeons can better explain specific pathologies and procedures to patients prior to surgery, which has been proven to improve a patient’s therapeutic understanding and satisfaction. 

 

Anatomical model

“The MediJet means that we’re winning in every area”, concludes Guigo. “We have greater management of growth requirements and have addressed quality issues, while also improving processes and educational practices.”

The CHU de Brest’s installation of the J5 MediJet was achieved thanks to support from the hospital’s Innoveo Endowment Fund, which is designed to support projects that improve the care, quality of life and comfort of patients. Since its installation, the use of the J5 MediJet has rapidly expanded to different hospital departments, including Interventional neuroradiology, orthopedic surgery, vascular surgery, neurosurgery, as well as to biomedical services. 

Additionally, as part of the government’s strategy for accelerating digital health, W.INN – the innovation center established by the CHU de Brest in 2021 – was recently designated as a Third-Party Experimentation Centre. As such, the CHU is further positioned as a key player in medical innovation at the local, regional and national level.

Looking ahead, the CHU’s next aim is to set up a dedicated 3D printing arm that will address the needs of the hospital’s departments, research team, and training. With the hospital focused on championing the technology’s general use within the medical sector, there is also a vision for producing 3D printed anatomical models for other hospitals, as well as for biomedical engineering schools.

Related Content

Medical head baner-webinar advance DAC B

Digital Anatomy Creator - a powerful tool that enhances the Digital Anatomy printer possibilities. Join the webinar & start creating custom complex medical models.

Kalinga Institute of Industrial Technology - Technology Business Incubator (KIIT TBI) is accelerating startup companies' growth in various sectors such as Biotech, Meditech, Aggrotech, and more. Watch to learn how KIIT TBI uses the Stratasys J5 MediJet to maximize digital health innovation for better pre-surgical planning and medical device development, and how the Stratasys F170 3D Printer speeds up design and prototyping processes for one of the most promising startups incubated at KIIT TBI.

Medical 458 big

Sterilization capability for 3D medical models is a big deal because the risk of contaminating the sterile environment is removed if the model is sterile.